Feiyu Feiyu Scrop F2 3-Axis Gimbal Stabilizer Gimbals & Stabilisers

Smooth Shots With Scorp 3-Axis Gimbal Stabilizer

Professional Videographers With A Dslr Or Mirrorless Camera Can Get Some Seriously Smooth Shots With The Scorp 3-Axis Gimbal Stabilizer From Feiyu. With Intuitive Controls And An Ergonomically Angled Handgrip, You Can Follow The Action, Whether Shooting From A Low-Angle Position Or Attached To A Boom Pole For Extra Height. You Can Access Various Shooting Modes And Precise Settings Via The Touchscreen On The Handgrip.

A Single Wheel On The Joystick Controls Parameters Like Shutter Speed And Iso, The Gimbal Tilt Angle, Or The Use Of A Third-Party Follow Focus System (Available Separately). A High-Powered Cpu Drives The Anti-Shake Algorithm Of This Stabilizer, Enabling The Mounted Camera To Capture Professional-Grade Footage. The 2500Mah Battery Runs This Device For Up To Thirteen Hours And Can Be Rapidly Recharged In Under Two.

Compatibility

Please See The Feiyu Website For A Full List Of Compatible Cameras And Lenses.

Precision Stabilization

The Gimbal Is Equipped With An Intricate Anti-Shake Algorithm Powered By A High-Octane Cpu. This Combination Enables Lightning-Fast Reactions To The Bumps Encountered While Shooting Handheld, Even When Running.

Low Center Of Gravity

Reposition The Camera Below The Handgrip To Improve Stability. Instead Of Balancing The Camera On Top Of The Gimbal, Using The Action Handle Lets The Weight Hang Below. This Enables Shooters To Capture Low-Angle Boom Shots By Fully Extending Their Arm Toward The Floor.

Wheel Control

A Wheel On The Joystick Is Designed To Control The Focus With Third-Party Follow-Focus Systems (Available Separately). Usb Type-C Ports Are Provided To Transmit This Data From The Gimbal To Your Existing Follow-Focus System. Parameters Like Iso And Shutter Speed, Or Gimbal Settings Like Follow Speed And Tilt Angle, Can Be Set With The Wheel.

Automated Modes

• Balance Calibration
• Horizontal-To-Vertical Flip
• Dolly Zoom
• Panorama
• Timelapse
• Rotation Mode

1.3″ Touchscreen

Located On The Joystick, This Square Screen Facilitates An On-The-Go Selection Of The Gimbal’S Various Shooting Modes And Settings, Including Motor Power And Follow Speed.

13-Hour Battery Life

The 2500Mah Battery Can Be Ready To Go In 1.6 Hours Using The Rapid, 18W Recharging Capabilities. On A Full Charge, It Can Last Up To Thirteen Hours, Provided The Rig Is Properly Balanced.

Lightweight Strength

Designed To Handle A Payload Of Up To 4.76 Kg, This Stabilizer Gets Its Strength From The Combination Of Aluminium Alloy And A Synthetic Macromolecular Resin.